SUNSHINE DT-21N Smart Touch Multimeter

DT-21N Smart Touch Multimeter

1. Smart Touch / Mini Slim / Super Tip Test Pen / Power-on Test / Automatic Recognition.

2. AC and DC voltage/normal temperature display/Frequency function/Resistance function/Capacitance function/diode/beep/flashlight/True RMS/data retention.

3.High-definition reverse display LCD screen, the reverse display screen has good visual impact, high-definition 4.3-inch large screen three-display + backlight.

4.Intelligent high-speed chip, more accurate automatic measurement, avoid errors, anti-burning design, with overload protection function

5.Touch sensitive and stable, fast measurement, easy to use.

6.Simultaneous display, large screen intuitive

7.Non-contact electric field measurement

8.Check the electric field signal strength, the stronger the signal, the fuller the "----" number of the signal, if there is no signal, it will display "EF"

9.Resistance measurement: Maximum 60MΩ range, fast measurement

10.Line continuity test: When the resistance of the line under test is >50Ω, the default is on-off test.

11.Capacitance Test: Automatic identification of capacitance, fast measurement.

12.True RMS: Most current waveforms are not sine waves Power supplies are distorted under different conditions, so it is very important to accurately measure AC current and voltage, true rms.

13.Normal measurement mode

14.real-time temperature: fter power on, the ambient temperature is automatically displayed, and the measured ambient temperature is displayed in real time.

15.LED flashlight lighting: Torch function, tap to turn on.

16.Ultra-thin design that fits easily into a trouser pocket.

17.True RMS measurement mode

product information:

1.60 segment analog bar/Speaker sound hole/NCV strong signal indication/Measurement function gear display/Current function selection prompt/Tester jack tips

2.NCV measurement touch key, long press for 2S to switch between ℃ and ℉ on the secondary display.

3.Fast capacitance measurement / frequency conversion measurement touch key, long press to turn on and off the flashlight.

4.AC and DC current positive input jack.

5.Measure the negative input terminal COM

6.Measure the positive end of the test lead.

7.Latch the HOLD key

8.Power and function selection key SELECT

9.Current room temperature function prompt

10.NCV weak signal indication

11.Overall length: 1100mm/lead length: 970mm

12. Touch Multimeter with battery

13.5999 (3 5/6) digit automatic polarity display/Double integral A/D conversion

14. Double integral A/D conversion about 3 times per second

15.The highest bit shows "OL", (0~40)℃, relative humidity <80%, 7th 1.5V AAA battery

16.Host*1/Instructions*1/Qualification certificate*1/Test leads*2/Temperature measurement line*1